This project was near Minneapolis, MN. The homeowner is building a garage on top of a thickened edge slab - 5 inch concrete with 12 inch footings. He used #3 GatorBar on 18 inch centers and the 2 inch rebar chair by Polylok.

This project was near Minneapolis, MN. The homeowner is building a garage on top of a thickened edge slab - 5 inch concrete with 12 inch footings. He used #3 GatorBar on 18 inch centers and the 2 inch rebar chair by Polylok.

Forms ready and dirt work complete

GatorBar set up and ready for concrete.

GatorBar stakes were used to hold up the reinforcement around the edge of the slab.

GatorBar can easily be cut with an angle grinder with a cut off wheel

Zip ties were used to secure the GatorBar in place to eliminate corrosion

Epoxy was used to secure the stem wall forms to the GatorBar to keep them level

The final product!

Completed pour